INSTALLATION (SOLID WALLS)

1. Slot the top of the shower seat bracket over the top of the wall track.

2. Pull the locking lever down and push the bottom of the shower seat bracket onto the wall track. Once in place release the locking lever. Test fixing strength and functionality of shower seat before use.

OPERATION:

3. To re-position the shower seat horizontally on the wall track, pull the locking lever down and hold id down while moving     the shower seat to its desired position. Once in position release the locking lever and check that it is engaged and the shower  seat is locked to the wall track.

4. To adjust the vertical setting of the shower seat, lift the height control lever up and move the seat to the desired height. Once the desired height has been reached, release the height control lever ensuring that it clicks into place.

Note: After changing the position of the shower seat, you must check that both the locking lever and height control level are engaged to ensure user safety.

CARE AND MAINTENANCE:

Clean with a soft cloth and warm soapy water.

Do not use harsh detergents, corrosive chemicals, or abrasive cleaners.

Shower seat can be pushed so it is vertically upright to save space when not in use.