INSTALLATION (SOLID WALLS)

1. Place the support arm in the desired position and mark the holes for drilling.

2. Using an appropriate drill bit for the wall surface and substrate, drill holes to suit the wall plugs.

3. Insert wall plugs

4. Put the support arm in place and insert the screws, fully tighten using the anti vandal key provided.

5. Put the screw over into the holes. Test fixing strength and functionality of support arm before use.

CARE AND MAINTENANCE:

1. Clean with a soft cloth and warm soapy water

2. Do not use harsh detergents, corrosive chemicals, or abrasive cleaners.