Maintain instruction points for attention

　

　▲ Acryl products & Acryl tray
　　　Acryl is methyl methacrylate (MMA).Not be cleaned with washing agents containing ammonia, acetone, formic formaldehyde, etc.The surface had better be cleaned with toothpaste and a cloth, which can't be knives or steel brushes.

　▲ Each part for shower room
　　＊Aluminum parts
　　　When cleaning the aluminum part, please scrape the stain with paper or cloth. If the stain can not be rubbed away, please polish with small piece of sandpaper In order to ensure the spraying completely, treat the aluminum with wax.

　　＊Tempered glass door
　　　After assembling the glass door, clean the tempered glass doors as the followings: Scratch the Silicone glass sealant which are stuck on the surface of the glass. Next, Feather out the area with cloth so you don't leave a low spot.

　　＊Artificial marble tray
　　　For general cleaning just use soap and water or any ammonia household cleaners (i.e. Windex, Scrubbing Bubbles, or 409) For stubbon stains you may use mildly abrasive cleaner such as Soft Scrub or Soft Scrub with bleach, or a diluted solution of bleach. To remove deep scratches and cuts you may sand with 240 grit sandpaper using a sanding block. Sand until the scratch disappears. Next restore the finish by using a mild abrasive cleaner and a maroon Scotch Brite pad.